China Fishing Rings

Around August 23 of each year in the Gregorian calendar, the summer is coming to an end, and the vitality is gradually restored. On January 5th of each year in the Gregorian calendar, the big cold fish is stiff and sleepless. Around September 7th of each year in the Gregorian calendar is white dew. Around December 22 of each year in the Gregorian calendar, 'Zhi' means the extreme and the smallest cold fish is exhausted, and the deep dwelling is warm. 'Immediately' means that the rainwater fish wakes up, and the appetite is not yet open. On February 4th of each year in the Gregorian calendar is the beginning of spring. Around February 18th of each year in the Gregorian calendar, there is love for the rain to start the sting fish, gentle and frugal. Xiaoshuyu is afraid of heat, and wind and rain only show up. The weather tus cooler.

On August 7th of each year in the Gregorian calendar, the summer fish is tired, so don't rush your fishing tackle. Fundamentally, the quality of fishing gear can be guaranteed. At this time, the temperature rises faster at the veal equinox. On October 23 of each year in the Gregorian calendar, the Lidong fish is fat and strong, and it is difficult to catch it. Around April 20th in the Gregorian calendar every year, it is rainy. Around July 23 of each year in the Gregorian calendar is the Great Heat. Around September 23 of each year in the Gregorian calendar, 'fen' means that the day and night are equal in length. On June 5th of each year in the Gregorian calendar, awn species, wheat and other awn crops mature in the summer solstice and fish find coolness. Around March 5th of each year in the Gregorian calendar is a startling sting.

Around October 8th of the Gregorian calendar every year, the frosty fish flourishes and the delicious flavors run the streets. Qiuyu is haggard and Qiuhu is not distressed. In the moing, there is dew on the vegetation and the equinox fish stretch and dance and tu the waves. Around November 22 of each year in the Gregorian calendar, the big snow fish monitors the cold and makes home to the sun. On January 20th of each year in the Gregorian calendar, Dahan is the coldest of the year.Lichun fish is confused and regrets fishing. The winter solstice fish is cautious about December 7 of the Gregorian calendar and is not easy to be deceived. On March 20th of each year in the Gregorian calendar, 'fen' means that the day and night are equal in length, and the fish are romantic and accompany you to sing fishing songs. Provide consumers with professional fishing gear trading platforms and information, and have abundant fishing gear resources. Around June 21 of each year in the Gregorian calendar is the summer solstice. Every year on May 21st of the Gregorian calendar, we are busy for the small mango fish, breaking the small fish basket.

Around July 7th of each year in the Gregorian calendar, Xiaoshu and Dashuyu retreat and wait for the cool weather. Around November 7th of each year in the Gregorian calendar, 'Lidong' means that the little snow fish is excited at the beginning of the winter, and is fighting for food. The Great Heat is the hottest day. China is an e-commerce platform dedicated to fishing gear under the China Net Library, which concentrates all upstream and downstream enterprises across the country for authentic purchase and wholesale.

The fish exhale and see bubbles in their nests. Every year around May 5 in the Gregorian calendar, 'immediately' means that the pond is full of fish, and it is best to play fishing skills. The increase in rain is good for the growth of grains and Lixia fish is crazy, which shocks new anglers. In the Gregorian calendar, Qingming is about April 5th every year, and the vegetation is already luxuriant. So if you want to pay more Fishing Line Spooler Manufacturers attention to the knowledge of fishing gear, please come here! The above information comes from China!

The passing coil should be aligned with the winding wheel holder. The closer the angle is to 90°, the more sensitive the response. (8) After the bait enters the water, there is no response after 20-30 minutes, then the rod should be raised and the bait changed again. After the sea pole is supported, a small bell is placed on the tip of the pole. Because the bait will disperse soon after entering the water, after half an hour, the bait will be eaten by the small fish, and the time will be wasted if the bait is not changed. (5) After the aconite falls into the water, immediately tu back the outlet ring and shake the reel handle to take up the line.

Generally, the fishing line is pulled by hand, as long as the line can be pulled. When you see the rod tip swinging sharply or ringing loudly, you can tu the loss by holding the rod back and raising the rod vigorously, then quickly take up the line, and after a few meters of the line, you have to raise the rod again, repeat this several times to make the hook fastened Fish lips. For more information, please visit China:. Hold the rod on the reel with your right hand, clamp the middle finger and ring finger on the reel to connect the back, hook the first joint of your index finger to the fishing line, flip out the loop, and cast the bait hook to the fishing spot according to your familiar throwing method. Therefore, this angle is the core of response sensitivity.

The method of using the sea rod is relatively complicated, but if it is applied properly, it is also handy to use, which can make our fishing more efficient. (4) Rotate the reel to make the bait group 30-40 cm away from the tip of the rod. As one of the most common types of fishing gear, how is it used? What are the steps to use the sea pole? (1) Pull the sea pole section by section so that the loops are aligned and in a straight line. (2) Install the reel, install the reel on the holder, fix it with a nut, tu the reel backstop switch to the reverse position, pull the thread head, the fishing line can be pulled out, and then one by one Pass through the coil until it passes through the pole tip. Then hang the aconite and bomb bait with the connecting ring to prepare for throwing.

When the line is retracted and the fishing line is still in a relaxed state, put the sea rod on the support, the elevation angle of the sea wholesale fishing tackle Manufacture rod (rod The height between the body and the ground should be larger, that is, steeper, and the elevation angle is directly related to the sensitivity of the rod tip.When we are preparing for fishing work, we will prepare all kinds of fishing gear. The joints of the sections should be tightened slightly. Generally speaking, the greater the elevation angle, the higher the sensitivity; on the contrary, the slower. Another criterion for judging whether the elevation angle is appropriate is the angle between the fishing rod and the fishing line. (6) In case of windy weather, a large elevation angle will make the fishing rod susceptible to the wind and swing. Each fishing gear has a different method of use. If it is too tight, the line resistance is too large, and the line will be easily broken when encountering a big fish; if it is too loose, the line resistance is too small, and the line will be too fast when encountering a big fish.

In order to increase the wind resistance of the sea pole, the elevation angle can be reduced, but not too small, which will reduce the sensitivity of the pole tip; in addition, the sea pole can also be retracted a few sections to reduce the pole height and also reduce the impact of wind; Or lay the sea rod on the shore, but pay attention to make the angle between the fishing rod and the fishing line close to 90° (7) After the sea rod is supported, you can react quietly, or listen to the bell, or watch the rod tip. (3) It is very important to tu the backstop switch back to the forward position and adjust the drag device

The passing coil should be aligned with the winding wheel holder. The closer the angle is to 90°, the more sensitive the response. (8) After the bait enters the water, there is no response after 20-30 minutes, then the rod should be raised and the bait changed again. After the sea pole is supported, a small bell is placed on the tip of the pole. Because the bait will disperse soon after entering the water, after half an hour, the bait will be eaten by the small fish, and the time will be wasted if the bait is not changed. (5) After the aconite falls into the water, immediately tu back the outlet ring and shake the reel handle to take up the line.

Generally, the fishing line is pulled by hand, as long as the line can be pulled. When you see the rod tip swinging sharply or ringing loudly, you can tu the loss by holding the rod back and raising the rod vigorously, then quickly take up the line, and after a few meters of the line, you have to raise the rod again, repeat this several times to make the hook fastened Fish lips. For more information, please visit China:. Hold the rod on the reel with your right hand, clamp the middle finger and ring finger on the reel to connect the back, hook the first joint of your index finger to the fishing line, flip out the loop, and cast the bait hook to the fishing spot according to your familiar throwing method. Therefore, this angle is the core of response sensitivity.

The method of using the sea rod is relatively complicated, but if it is applied properly, it is also handy to use, which can make our fishing more efficient. (4) Rotate the reel to make the bait group 30-40 cm away from the tip of the rod. As one of the most common types of fishing gear, how is it used? What are the steps to use the sea pole? (1) Pull the sea pole section by section so that the loops are aligned and in a straight line. (2) Install the reel, install the reel on the holder, fix it with a nut, tu the reel backstop switch to the reverse position, pull the thread head, the fishing line can be pulled out, and then one by one Pass through the coil until it passes through the pole tip. Then hang the aconite and bomb bait with the connecting ring to prepare for throwing.

When the line is retracted and the fishing line is still in a relaxed state, put the sea rod on the support, the elevation angle of the sea wholesale fishing tackle Manufacture rod (rod The height between the body and the ground should be larger, that is, steeper, and the elevation angle is directly related to the sensitivity of the rod tip.When we are preparing for fishing work, we will prepare all kinds of fishing gear. The joints of the sections should be tightened slightly. Generally speaking, the greater the elevation angle, the higher the sensitivity; on the contrary, the slower. Another criterion for judging whether the elevation angle is appropriate is the angle between the fishing rod and the fishing line. (6) In case of windy weather, a large elevation angle will make the fishing rod susceptible to the wind and swing. Each fishing gear has a different method of use. If it is too tight, the line resistance is too large, and the line will be easily broken when encountering a big fish; if it is too loose, the line resistance is too small, and the line will be too fast when encountering a big fish.

In order to increase the wind resistance of the sea pole, the elevation angle can be reduced, but not too small, which will reduce the sensitivity of the pole tip; in addition, the sea pole can also be retracted a few sections to reduce the pole height and also reduce the impact of wind; Or lay the sea rod on the shore, but pay attention to make the angle between the fishing rod and the fishing line close to 90° (7) After the sea rod is supported, you can react quietly, or listen to the bell, or watch the rod tip. (3) It is very important to tu the backstop switch back to the forward position and adjust the drag device

The passing coil should be aligned with the winding wheel holder. The closer the angle is to 90°, the more sensitive the response. (8) After the bait enters the water, there is no response after 20-30 minutes, then the rod should be raised and the bait changed again. After the sea pole is supported, a small bell is placed on the tip of the pole. Because the bait will disperse soon after entering the water, after half an hour, the bait will be eaten by the small fish, and the time will be wasted if the bait is not changed. (5) After the aconite falls into the water, immediately tu back the outlet ring and shake the reel handle to take up the line.

Generally, the fishing line is pulled by hand, as long as the line can be pulled. When you see the rod tip swinging sharply or ringing loudly, you can tu the loss by holding the rod back and raising the rod vigorously, then quickly take up the line, and after a few meters of the line, you have to raise the rod again, repeat this several times to make the hook fastened Fish lips. For more information, please visit China:. Hold the rod on the reel with your right hand, clamp the middle finger and ring finger on the reel to connect the back, hook the first joint of your index finger to the fishing line, flip out the loop, and cast the bait hook to the fishing spot according to your familiar throwing method. Therefore, this angle is the core of response sensitivity.

The method of using the sea rod is relatively complicated, but if it is applied properly, it is also handy to use, which can make our fishing more efficient. (4) Rotate the reel to make the bait group 30-40 cm away from the tip of the rod. As one of the most common types of fishing gear, how is it used? What are the steps to use the sea pole? (1) Pull the sea pole section by section so that the loops are aligned and in a straight line. (2) Install the reel, install the reel on the holder, fix it with a nut, tu the reel backstop switch to the reverse position, pull the thread head, the fishing line can be pulled out, and then one by one Pass through the coil until it passes through the pole tip. Then hang the aconite and bomb bait with the connecting ring to prepare for throwing.

When the line is retracted and the fishing line is still in a relaxed state, put the sea rod on the support, the elevation angle of the sea wholesale fishing tackle Manufacture rod (rod The height between the body and the ground should be larger, that is, steeper, and the elevation angle is directly related to the sensitivity of the rod tip.When we are preparing for fishing work, we will prepare all kinds of fishing gear. The joints of the sections should be tightened slightly. Generally speaking, the greater the elevation angle, the higher the sensitivity; on the contrary, the slower. Another criterion for judging whether the elevation angle is appropriate is the angle between the fishing rod and the fishing line. (6) In case of windy weather, a large elevation angle will make the fishing rod susceptible to the wind and swing. Each fishing gear has a different method of use. If it is too tight, the line resistance is too large, and the line will be easily broken when encountering a big fish; if it is too loose, the line resistance is too small, and the line will be too fast when encountering a big fish.

In order to increase the wind resistance of the sea pole, the elevation angle can be reduced, but not too small, which will reduce the sensitivity of the pole tip; in addition, the sea pole can also be retracted a few sections to reduce the pole height and also reduce the impact of wind; Or lay the sea rod on the shore, but pay attention to make the angle between the fishing rod and the fishing line close to 90° (7) After the sea rod is supported, you can react quietly, or listen to the bell, or watch the rod tip. (3) It is very important to tu the backstop switch back to the forward position and adjust the drag device

The passing coil should be aligned with the winding wheel holder. The closer the angle is to 90°, the more sensitive the response. (8) After the bait enters the water, there is no response after 20-30 minutes, then the rod should be raised and the bait changed again. After the sea pole is supported, a small bell is placed on the tip of the pole. Because the bait will disperse soon after entering the water, after half an hour, the bait will be eaten by the small fish, and the time will be wasted if the bait is not changed. (5) After the aconite falls into the water, immediately tu back the outlet ring and shake the reel handle to take up the line.

Generally, the fishing line is pulled by hand, as long as the line can be pulled. When you see the rod tip swinging sharply or ringing loudly, you can tu the loss by holding the rod back and raising the rod vigorously, then quickly take up the line, and after a few meters of the line, you have to raise the rod again, repeat this several times to make the hook fastened Fish lips. For more information, please visit China:. Hold the rod on the reel with your right hand, clamp the middle finger and ring finger on the reel to connect the back, hook the first joint of your index finger to the fishing line, flip out the loop, and cast the bait hook to the fishing spot according to your familiar throwing method. Therefore, this angle is the core of response sensitivity.

The method of using the sea rod is relatively complicated, but if it is applied properly, it is also handy to use, which can make our fishing more efficient. (4) Rotate the reel to make the bait group 30-40 cm away from the tip of the rod. As one of the most common types of fishing gear, how is it used? What are the steps to use the sea pole? (1) Pull the sea pole section by section so that the loops are aligned and in a straight line. (2) Install the reel, install the reel on the holder, fix it with a nut, tu the reel backstop switch to the reverse position, pull the thread head, the fishing line can be pulled out, and then one by one Pass through the coil until it passes through the pole tip. Then hang the aconite and bomb bait with the connecting ring to prepare for throwing.

When the line is retracted and the fishing line is still in a relaxed state, put the sea rod on the support, the elevation angle of the sea wholesale fishing tackle Manufacture rod (rod The height between the body and the ground should be larger, that is, steeper, and the elevation angle is directly related to the sensitivity of the rod tip.When we are preparing for fishing work, we will prepare all kinds of fishing gear. The joints of the sections should be tightened slightly. Generally speaking, the greater the elevation angle, the higher the sensitivity; on the contrary, the slower. Another criterion for judging whether the elevation angle is appropriate is the angle between the fishing rod and the fishing line. (6) In case of windy weather, a large elevation angle will make the fishing rod susceptible to the wind and swing. Each fishing gear has a different method of use. If it is too tight, the line resistance is too large, and the line will be easily broken when encountering a big fish; if it is too loose, the line resistance is too small, and the line will be too fast when encountering a big fish.

In order to increase the wind resistance of the sea pole, the elevation angle can be reduced, but not too small, which will reduce the sensitivity of the pole tip; in addition, the sea pole can also be retracted a few sections to reduce the pole height and also reduce the impact of wind; Or lay the sea rod on the shore, but pay attention to make the angle between the fishing rod and the fishing line close to 90° (7) After the sea rod is supported, you can react quietly, or listen to the bell, or watch the rod tip. (3) It is very important to tu the backstop switch back to the forward position and adjust the drag device

The passing coil should be aligned with the winding wheel holder. The closer the angle is to 90°, the more sensitive the response. (8) After the bait enters the water, there is no response after 20-30 minutes, then the rod should be raised and the bait changed again. After the sea pole is supported, a small bell is placed on the tip of the pole. Because the bait will disperse soon after entering the water, after half an hour, the bait will be eaten by the small fish, and the time will be wasted if the bait is not changed. (5) After the aconite falls into the water, immediately tu back the outlet ring and shake the reel handle to take up the line.

Generally, the fishing line is pulled by hand, as long as the line can be pulled. When you see the rod tip swinging sharply or ringing loudly, you can tu the loss by holding the rod back and raising the rod vigorously, then quickly take up the line, and after a few meters of the line, you have to raise the rod again, repeat this several times to make the hook fastened Fish lips. For more information, please visit China:. Hold the rod on the reel with your right hand, clamp the middle finger and ring finger on the reel to connect the back, hook the first joint of your index finger to the fishing line, flip out the loop, and cast the bait hook to the fishing spot according to your familiar throwing method. Therefore, this angle is the core of response sensitivity.

The method of using the sea rod is relatively complicated, but if it is applied properly, it is also handy to use, which can make our fishing more efficient. (4) Rotate the reel to make the bait group 30-40 cm away from the tip of the rod. As one of the most common types of fishing gear, how is it used? What are the steps to use the sea pole? (1) Pull the sea pole section by section so that the loops are aligned and in a straight line. (2) Install the reel, install the reel on the holder, fix it with a nut, tu the reel backstop switch to the reverse position, pull the thread head, the fishing line can be pulled out, and then one by one Pass through the coil until it passes through the pole tip. Then hang the aconite and bomb bait with the connecting ring to prepare for throwing.

When the line is retracted and the fishing line is still in a relaxed state, put the sea rod on the support, the elevation angle of the sea wholesale fishing tackle Manufacture rod (rod The height between the body and the ground should be larger, that is, steeper, and the elevation angle is directly related to the sensitivity of the rod tip.When we are preparing for fishing work, we will prepare all kinds of fishing gear. The joints of the sections should be tightened slightly. Generally speaking, the greater the elevation angle, the higher the sensitivity; on the contrary, the slower. Another criterion for judging whether the elevation angle is appropriate is the angle between the fishing rod and the fishing line. (6) In case of windy weather, a large elevation angle will make the fishing rod susceptible to the wind and swing. Each fishing gear has a different method of use. If it is too tight, the line resistance is too large, and the line will be easily broken when encountering a big fish; if it is too loose, the line resistance is too small, and the line will be too fast when encountering a big fish.

In order to increase the wind resistance of the sea pole, the elevation angle can be reduced, but not too small, which will reduce the sensitivity of the pole tip; in addition, the sea pole can also be retracted a few sections to reduce the pole height and also reduce the impact of wind; Or lay the sea rod on the shore, but pay attention to make the angle between the fishing rod and the fishing line close to 90° (7) After the sea rod is supported, you can react quietly, or listen to the bell, or watch the rod tip. (3) It is very important to tu the backstop switch back to the forward position and adjust the drag device

The passing coil should be aligned with the winding wheel holder. The closer the angle is to 90°, the more sensitive the response. (8) After the bait enters the water, there is no response after 20-30 minutes, then the rod should be raised and the bait changed again. After the sea pole is supported, a small bell is placed on the tip of the pole. Because the bait will disperse soon after entering the water, after half an hour, the bait will be eaten by the small fish, and the time will be wasted if the bait is not changed. (5) After the aconite falls into the water, immediately tu back the outlet ring and shake the reel handle to take up the line.

Generally, the fishing line is pulled by hand, as long as the line can be pulled. When you see the rod tip swinging sharply or ringing loudly, you can tu the loss by holding the rod back and raising the rod vigorously, then quickly take up the line, and after a few meters of the line, you have to raise the rod again, repeat this several times to make the hook fastened Fish lips. For more information, please visit China:. Hold the rod on the reel with your right hand, clamp the middle finger and ring finger on the reel to connect the back, hook the first joint of your index finger to the fishing line, flip out the loop, and cast the bait hook to the fishing spot according to your familiar throwing method. Therefore, this angle is the core of response sensitivity.

The method of using the sea rod is relatively complicated, but if it is applied properly, it is also handy to use, which can make our fishing more efficient. (4) Rotate the reel to make the bait group 30-40 cm away from the tip of the rod. As one of the most common types of fishing gear, how is it used? What are the steps to use the sea pole? (1) Pull the sea pole section by section so that the loops are aligned and in a straight line. (2) Install the reel, install the reel on the holder, fix it with a nut, tu the reel backstop switch to the reverse position, pull the thread head, the fishing line can be pulled out, and then one by one Pass through the coil until it passes through the pole tip. Then hang the aconite and bomb bait with the connecting ring to prepare for throwing.

When the line is retracted and the fishing line is still in a relaxed state, put the sea rod on the support, the elevation angle of the sea wholesale fishing tackle Manufacture rod (rod The height between the body and the ground should be larger, that is, steeper, and the elevation angle is directly related to the sensitivity of the rod tip.When we are preparing for fishing work, we will prepare all kinds of fishing gear. The joints of the sections should be tightened slightly. Generally speaking, the greater the elevation angle, the higher the sensitivity; on the contrary, the slower. Another criterion for judging whether the elevation angle is appropriate is the angle between the fishing rod and the fishing line. (6) In case of windy weather, a large elevation angle will make the fishing rod susceptible to the wind and swing. Each fishing gear has a different method of use. If it is too tight, the line resistance is too large, and the line will be easily broken when encountering a big fish; if it is too loose, the line resistance is too small, and the line will be too fast when encountering a big fish.

In order to increase the wind resistance of the sea pole, the elevation angle can be reduced, but not too small, which will reduce the sensitivity of the pole tip; in addition, the sea pole can also be retracted a few sections to reduce the pole height and also reduce the impact of wind; Or lay the sea rod on the shore, but pay attention to make the angle between the fishing rod and the fishing line close to 90° (7) After the sea rod is supported, you can react quietly, or listen to the bell, or watch the rod tip. (3) It is very important to tu the backstop switch back to the forward position and adjust the drag device

The passing coil should be aligned with the winding wheel holder. The closer the angle is to 90°, the more sensitive the response. (8) After the bait enters the water, there is no response after 20-30 minutes, then the rod should be raised and the bait changed again. After the sea pole is supported, a small bell is placed on the tip of the pole. Because the bait will disperse soon after entering the water, after half an hour, the bait will be eaten by the small fish, and the time will be wasted if the bait is not changed. (5) After the aconite falls into the water, immediately tu back the outlet ring and shake the reel handle to take up the line.

Generally, the fishing line is pulled by hand, as long as the line can be pulled. When you see the rod tip swinging sharply or ringing loudly, you can tu the loss by holding the rod back and raising the rod vigorously, then quickly take up the line, and after a few meters of the line, you have to raise the rod again, repeat this several times to make the hook fastened Fish lips. For more information, please visit China:. Hold the rod on the reel with your right hand, clamp the middle finger and ring finger on the reel to connect the back, hook the first joint of your index finger to the fishing line, flip out the loop, and cast the bait hook to the fishing spot according to your familiar throwing method. Therefore, this angle is the core of response sensitivity.

The method of using the sea rod is relatively complicated, but if it is applied properly, it is also handy to use, which can make our fishing more efficient. (4) Rotate the reel to make the bait group 30-40 cm away from the tip of the rod. As one of the most common types of fishing gear, how is it used? What are the steps to use the sea pole? (1) Pull the sea pole section by section so that the loops are aligned and in a straight line. (2) Install the reel, install the reel on the holder, fix it with a nut, tu the reel backstop switch to the reverse position, pull the thread head, the fishing line can be pulled out, and then one by one Pass through the coil until it passes through the pole tip. Then hang the aconite and bomb bait with the connecting ring to prepare for throwing.

When the line is retracted and the fishing line is still in a relaxed state, put the sea rod on the support, the elevation angle of the sea wholesale fishing tackle Manufacture rod (rod The height between the body and the ground should be larger, that is, steeper, and the elevation angle is directly related to the sensitivity of the rod tip.When we are preparing for fishing work, we will prepare all kinds of fishing gear. The joints of the sections should be tightened slightly. Generally speaking, the greater the elevation angle, the higher the sensitivity; on the contrary, the slower. Another criterion for judging whether the elevation angle is appropriate is the angle between the fishing rod and the fishing line. (6) In case of windy weather, a large elevation angle will make the fishing rod susceptible to the wind and swing. Each fishing gear has a different method of use. If it is too tight, the line resistance is too large, and the line will be easily broken when encountering a big fish; if it is too loose, the line resistance is too small, and the line will be too fast when encountering a big fish.

In order to increase the wind resistance of the sea pole, the elevation angle can be reduced, but not too small, which will reduce the sensitivity of the pole tip; in addition, the sea pole can also be retracted a few sections to reduce the pole height and also reduce the impact of wind; Or lay the sea rod on the shore, but pay attention to make the angle between the fishing rod and the fishing line close to 90° (7) After the sea rod is supported, you can react quietly, or listen to the bell, or watch the rod tip. (3) It is very important to tu the backstop switch back to the forward position and adjust the drag device

The passing coil should be aligned with the winding wheel holder. The closer the angle is to 90°, the more sensitive the response. (8) After the bait enters the water, there is no response after 20-30 minutes, then the rod should be raised and the bait changed again. After the sea pole is supported, a small bell is placed on the tip of the pole. Because the bait will disperse soon after entering the water, after half an hour, the bait will be eaten by the small fish, and the time will be wasted if the bait is not changed. (5) After the aconite falls into the water, immediately tu back the outlet ring and shake the reel handle to take up the line.

Generally, the fishing line is pulled by hand, as long as the line can be pulled. When you see the rod tip swinging sharply or ringing loudly, you can tu the loss by holding the rod back and raising the rod vigorously, then quickly take up the line, and after a few meters of the line, you have to raise the rod again, repeat this several times to make the hook fastened Fish lips. For more information, please visit China:. Hold the rod on the reel with your right hand, clamp the middle finger and ring finger on the reel to connect the back, hook the first joint of your index finger to the fishing line, flip out the loop, and cast the bait hook to the fishing spot according to your familiar throwing method. Therefore, this angle is the core of response sensitivity.

The method of using the sea rod is relatively complicated, but if it is applied properly, it is also handy to use, which can make our fishing more efficient. (4) Rotate the reel to make the bait group 30-40 cm away from the tip of the rod. As one of the most common types of fishing gear, how is it used? What are the steps to use the sea pole? (1) Pull the sea pole section by section so that the loops are aligned and in a straight line. (2) Install the reel, install the reel on the holder, fix it with a nut, tu the reel backstop switch to the reverse position, pull the thread head, the fishing line can be pulled out, and then one by one Pass through the coil until it passes through the pole tip. Then hang the aconite and bomb bait with the connecting ring to prepare for throwing.

When the line is retracted and the fishing line is still in a relaxed state, put the sea rod on the support, the elevation angle of the sea wholesale fishing tackle Manufacture rod (rod The height between the body and the ground should be larger, that is, steeper, and the elevation angle is directly related to the sensitivity of the rod tip.When we are preparing for fishing work, we will prepare all kinds of fishing gear. The joints of the sections should be tightened slightly. Generally speaking, the greater the elevation angle, the higher the sensitivity; on the contrary, the slower. Another criterion for judging whether the elevation angle is appropriate is the angle between the fishing rod and the fishing line. (6) In case of windy weather, a large elevation angle will make the fishing rod susceptible to the wind and swing. Each fishing gear has a different method of use. If it is too tight, the line resistance is too large, and the line will be easily broken when encountering a big fish; if it is too loose, the line resistance is too small, and the line will be too fast when encountering a big fish.

In order to increase the wind resistance of the sea pole, the elevation angle can be reduced, but not too small, which will reduce the sensitivity of the pole tip; in addition, the sea pole can also be retracted a few sections to reduce the pole height and also reduce the impact of wind; Or lay the sea rod on the shore, but pay attention to make the angle between the fishing rod and the fishing line close to 90° (7) After the sea rod is supported, you can react quietly, or listen to the bell, or watch the rod tip. (3) It is very important to tu the backstop switch back to the forward position and adjust the drag device